So I did the video mod and the best screen size that is square has about 1 inch around it. Is this normal?
There is also some double imaging (like it's not in focus) Is there an adjustment?
How do I know if pin 25 is completely isolated .... would this be a cause?
Thanks,
Steven
Video Mod Questions
February 11, 2007 - 9:25pm
#1
Video Mod Questions
Side margins can be reduced with the CL26 mod.
Top margins can be reduced by tweaking the pots on the back of the analogue board - I've never found that that isn't enough.
Double imaging is not standard! Try the little pot on the PCB at the end of the CRT.
Good luck!
Stuart