More ADTPro stuff, now with Uthernet II

Sorry about the bogus post, I accidentally put the body in the teaser panel and can't figure out how to fix it. Here is the "real" post.
----------------------------------------------------------------------
I am quite happy that I can now transfer files back and forth with my Apple IIe using ADTPro and serial connection. Just one more observation on that- curiously, I still cannot run ADTPro from my CFFA card, but it runs fine when I boot off the 3.5" disk I got from RetroFloppy. For what it is worth, the CFFA boots into ProDos 8 2.01 while the ADTPro disk boots into ProDos 1.9.

Now- the Uthernet II card. I just got it yesterday, and cannot get ADTPro to work it it. It keeps saying "ETHERNET INIT FAILED" and tells me to run Config. I have tried both the auto config and the manual config.

As far as I can tell, it is functioning fine. All the lights light up that are supposed to, and it passed that "COX4" test described in it's manual.

Also-- I can run Contiki (which I was able to get thanks to the serial connection of ADTPro). Contiki gets it's IP configuration fine from the router, and I can telnet to it from my windows machine.

I don't know why Contiki configures automatically, but ADTPro will not. One question I have is; exactly what does the error "ETHERNET INIT FAILED" mean? I assume it means it cannot connect to the router. But I wonder if instead it means it cannot connect to my windows ADTPro server in which case it might be a firewall problem on my machine.

I wish ADTPro showed the results of it's configuration efforts like Contiki does. That would be helpful.

Does anybody have any thoughts?

Thanks,
Skip