Hi,
I got my first Apple IIe Platinum. I got it for a good price I think (60$). Inside were also a 5.25 controller card and a SSC. That's all very nice.
What is not so nice is the fact that it has a video problem.
When I turn it on I get this picture:
After typing ctrl apple reset I got this:
After typing that again the first appeared again. After a while only the first picture appears and nothing else happens if I type ctrl apple reset ...
I tried the following chips from an Apple IIe enhanced (normal not Platinum) without success:
MMU chip
CPU
Video ROM
Keyboard ROM
also tested the following IC's:
SN74LS10N
74LS245WP
74F109N
342-0170-A
What could be the problem?
Thanks for any hint!
However, a 74LS10 is not intended for IIe boards.
I do have an Apple IIe enhanced and this Apple IIe Platinum - on both boards is a 74LS10N.
Relevant is the designation on the silkscreen. Schottky-TTL types provide more output current and speed. I have never seen before boards with LS10.
At //e ->
Self Test => Ctrl + Closed_Apple + Reset
SpeedyG
Hi Speedy,
thanks - yes, I've done the self test (on the Platinum Reset,Ctrl, open Apple and Option) but there happens nothing while doing that. The screen is like the first picture of the monitor above.
Meanwhile I only get the first picture of the monitor - the second one does not appear anymore. I suppose that the faulty chip is now really faulty![Smile](https://www.applefritter.com/sites/all/modules/smiley/packs/kolobok/smile.gif)
So far I've tested all chips on the board that are not soldered except the CF ROM which I'll have to order.
But before I'll do that I ordered yesterday the two RAM chips.
I'll post what happens ...
My first thought is - have you checked the power supply? These tend to be one of the main area's of failure in any old computer.
Lot's of weird behaviour is possible if your PSU is out of spec.
If you have access to a different //e PSU, I would recommend trying it with your board before doing anything else.
Thanks! Yes, I've tried a known working PSU - the same.
The ordered RAM chips should arrive in the next days ...
Is it ok to piggy-back them for testing on the old? If yes should I solder them on the old? (Never done that ...)
Never !
Unless you want to kill more chips.SpeedyG
Ah, ok - thanks!