Other

Power Button Mod - Back of Power Button Board

The back of the Power Button Board. Hey, some people are kinky like that.

Taxonomy: 

Power Button Mod - Power Button Assembly

This is the Power Button Assembly. Board, cover, ten wire cable.

Taxonomy: 

Power Button Mod - Finished Product

The finished product.

Taxonomy: 

Power Button Mod - Where to put the new LED

Insert the long pin of the LED into the left hole and the short pin into the center hole. Solder, test, and you're done.

Taxonomy: 

Power Button Mod - Close up of empty LED holes

A close up of the empty holes in the board for the LED. The factory LED has two colors so left pin is for the green and the right is for orange. The center pin is shared.

Taxonomy: 

Power Button Mod - Board after factory Green/Orange LED is removed

The power, restart, and programmer's button board without factory Green/Orange LED from a Sawtooth G4.

Taxonomy: 

doppia

sleepy

Taxonomy: 

Palm VX faulty backlight chip

Palm VX backlight death and battery drain is fixed by removing the chip shown!

Taxonomy: 

Open PowerMac G4

This is the pre-Quicksilver PowerMac G4 with the case open.

Taxonomy: 

Original PowerMac G4 (no ZIP)

This is what the cases of all PowerMac G4s looked like before the QuickSilver. The lower bay could have a ZIP drive.

Taxonomy: 

Pages

Subscribe to Other