PowerCenter -Advice on Video Board

7 posts / 0 new
Last post
Offline
Last seen: 17 years 4 months ago
Joined: Aug 22 2007 - 00:00
Posts: 4
PowerCenter -Advice on Video Board

I own and use a PowerComputing PowerCenter 132 boosted to a G3 with 500MHz. With the help of OWC, I'm running OS 9.2.2...phew!

Well, a former workmate gave me a card and I don't know if it's a simple (and faster) replacement for the monitor video:

Card has "TWIN TURBO 128+" on one processor and a chip with white paper label reading: "Twin Turbo 128M8/Revision 3.6"...

Can somebody tell me what to do with it? And I'll thank you in advance for all the wisecracks that that opens up!

Thanks, Paul

eeun's picture
Offline
Last seen: 1 year 9 months ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
Hi, Paul; The Twin Turbo c

Hi, Paul;

The Twin Turbo card shipped in late Power Computing machines, and has 4 MB onboard.

It's better than the stock video, and offers a slightly higher max. resolution, but it won't offer any whiz, bang that you'd get from a Radeon card that offered better 3D.

Offline
Last seen: 17 years 4 months ago
Joined: Aug 22 2007 - 00:00
Posts: 4
Twin Turbo Card

Thanks Jack!

So, I guess it's worth the time to put in this card...dig that Darlek with the toilet plunger!

Paul

Offline
Last seen: 8 years 8 months ago
Joined: Dec 20 2003 - 10:38
Posts: 211
Re: PowerCenter -Advice on Video Board

Card has "TWIN TURBO 128+" on one processor and a chip with white paper label reading: "Twin Turbo 128M8/Revision 3.6"...

"128M8" -- the last two characters in the name are the important ones.

"M" means Macintosh (there was a PC version too).

"8" means 8MB of VRAM.

At the time of introduction, Twin Turbos were pretty nifty. Your 2D performance will be improved over built-in video, but not quite as much as by a Radeon 7000 family card. For games and 3D apps, get a Radeon.

Offline
Last seen: 17 years 4 months ago
Joined: Aug 22 2007 - 00:00
Posts: 4
Twin Turbo Card

Thank you so much for your help.

Paul

Offline
Last seen: 15 years 6 months ago
Joined: Sep 21 2004 - 01:45
Posts: 74
Re: PowerCenter -Advice on Video Board

I own and use a PowerComputing PowerCenter 132 boosted to a G3 with 500MHz. With the help of OWC, I'm running OS 9.2.2...phew!

Well, a former workmate gave me a card and I don't know if it's a simple (and faster) replacement for the monitor video:

Card has "TWIN TURBO 128+" on one processor and a chip with white paper label reading: "Twin Turbo 128M8/Revision 3.6"...

Can somebody tell me what to do with it? And I'll thank you in advance for all the wisecracks that that opens up!

Thanks, Paul

Slap that baby into your machine and throw them both in a lake!

Seriously though, it should work, but in reality there's not much you could possibly be be doing that's going to need a 10 year old video card as an upgrade. What I mean is that you're not looking to do something with this card that you couldn't do before.

Offline
Last seen: 17 years 4 months ago
Joined: Aug 22 2007 - 00:00
Posts: 4
PowerCenter-Throw it in a Lake

Thanks!

Your logic is pure; as is my packratism! I have an Apple IIe in the attic and I'd still have my SE30 if my ex-wife hadn't given it to a neighbor whose son threw it out!

I'm keeping my PowerCenter 9.0 machine available and true, I don't run PhotoShop on it anymore but it's a backup unit and I still use it for personal letter writing and Quicken and actually use it for printing with EPSON STYLUS RIP as I can't afford to get a Postscript RIP for my G4 (about $300). When I finally get a G5 or PowerBook, I don't know where I'll put all this stuff! Is the IIe worth anything?

Cheers!

Log in or register to post comments