The title pretty much sums it up. I have an Apple ][ plus board with a damaged connector at Slot 6 (pretty important slot), and I'm looking for a replacement cheaper than what I'm seeing on eBay.
Anonymous
User login
Please support the defense of Ukraine.
Direct or via Unclutter App
Active forum topics
Recent content
Navigation
No Ads.
No Trackers.
No Social Media.
All Content Locally Hosted.
Built on Free Software.
We have complied with zero government requests for information.
The originals may have been made by EDAC, but there are parts from many vendors which will fit. Are they green or black, and do they have the extensions with screw mounting holes ("lugs")?
You can use the EDAC 345-050-520-202 which is green and does have lugs, although I have never seen an Apple where they were actually screwed down. Sullins ECC25DRXH, or Cinch 50-25SN-11 are equivalent.
Thanks for this, but I don't think these are the right ones. The board I have is a ][ Plus, so the connectors are black with no mounting holes. Sorry, probably should have specified that in the title as well as the post. Honestly, I wish I had the Revision 0, but I'm not that lucky/rich. However, if I ever get a replica board at least now I'll know what to get for it.
In any case, aside from the right part numbers, I should also ask what would be a good source for them? I've looked up the parts you suggested, and so far, they've either been out of stock, or the sight won't give the inventory?
https://www.mouser.com/
Part # A8D25DS27C2
Black without lugs could be EDAC 395-050-520-201, Sullins [any letter][B or C]C25DRXN, Cinch 50-25SN-12, etc.
The key is that the pin pitch should be 0.100", 2 rows, 25 pins per row, 50 pins total, with 0.200" between rows. You can plug these into a parametric search engine like Octopart to see matches.
Thanks! I found them on DigiKey!