Well decided to visit my Apple-1 NTI board at the bank.
I took along my Nikon FX format camera and my new 50mm prime lens.
As I get some time over the next few days I’ll post more of these as I took a lot and need to choose which ones to post as I also need to keep in mind of not posting pics that could help someone pass off a reproduction as real.
Looking forward to seeing the rest...the bokeh from that lens is nice.
I think this one shows the boards condition better than the one above, though it does have a few specs of dust. Should have brought a can of air with me.
and how about an ACI shot...
Which standoff’s are you using to protect the back of the board?
Looks like he's using a version of this:
https://www.ebay.com/itm/250943417913/ put into a Hex stand-off,
Or these with a nylon spacer:
https://www.ebay.com/itm/381969292984/
https://www.ebay.com/itm/192377877639/
Hard to see with the blurr ...
No these are not snap-in. They are normal nylon knurled thumb screws with nylon washers and nuts. Not the ones you have the link on from eBay.
I purchase them in a local hardware store (Grainger) and use them for a lot of projects including Mimeo and Apple-1s.
Cheers,
Corey