BeOS on a G4 Sonnet upgraded 8600?

5 posts / 0 new
Last post
aladds's picture
Offline
Last seen: 1 month 23 hours ago
Joined: Dec 26 2003 - 16:21
Posts: 299
BeOS on a G4 Sonnet upgraded 8600?

would it work, the offer for the mac is here:
http://www.2ndchancepc.co.uk/special-offers.html
the second one down

cheers

Tom Owad's picture
Offline
Last seen: 2 days 16 hours ago
Joined: Dec 16 2003 - 15:14
Posts: 3385
BeOS will neither work with G

BeOS will neither work with G3 nor G4 processors.

aladds's picture
Offline
Last seen: 1 month 23 hours ago
Joined: Dec 26 2003 - 16:21
Posts: 299
but according to here (near t

but according to here (near the bottom):
http://www.beatjapan.org/mirror/www.be.com/support/guides/beosreadylist_ppc.html
and here(it also syas G4, but it has no proof, i would like to knoe of someone who has tried it before buying the mac(it does say they're not sure)):
http://wiki.bebits.com/page/BeOSplatformsPPC

it will work with ppc750 series processors

Tom Owad's picture
Offline
Last seen: 2 days 16 hours ago
Joined: Dec 16 2003 - 15:14
Posts: 3385
My mistake - it's a question

My mistake - it's a question of motherboard design, not processor, so I suppose you've got a shot.

BeDrivers

Also note: "Some 8600/250 and 9600/250 are incompatible with the BeOS. It seems there are two versions of the logic board for these particular systems, one that works, one that doesn't." - Be's site

aladds's picture
Offline
Last seen: 1 month 23 hours ago
Joined: Dec 26 2003 - 16:21
Posts: 299
it should work

according to here:
http://www.bedrivers.com/hardware/info.php?product=1100&category=3&sub=21

i'm going to risk it, if it dosn't work, i'll probably install darwin 7.0.1 via xpostfacto

Log in or register to post comments