I recently got my old Apple II Plus going with help from a member with a spare MM5740AAE/N.
Anyway, I noticed an odd thing with the color killer circuit.
It is "on" when booted (black/white only).
You can run something in color, like just "GR" from BASIC. Color looks fine.
Try to turn color off, like "TEXT" from BASIC. Color remains on.
Color mode won't turn off until I power the machine back off. The color killer is never re-engaged.
Easy fix?
EDIT: I think this may be a tuning issue between my monitor (Sony PVM) and this early board (Rev 4). My other Apple II+ will switch this monitor in and out, but not this one. I can power off the display and back on, and it will be black and white again. So the CK is working, just not "enough".
The "color killer' doesn't completely eliminate the color burst part of the NTSC signal and some monitors can still lock on the attenuated color burst. A fix would be to stop the color burst completely with a logic gate before it's added to the rest of the NTSC output.
regards,
Mike W.
I see this same behavior with some older rev mobos and my LCD monitors as well. It is definitely a tuning issue, as interrupting the signal and reconnecting (unplug/plug the RCA cable, power-cycle either the computer or the monitor) can fix it.
Thanks guys- good to know there is nothing "wrong" with this early board. I think my other is an RFI board, but this one is earlier. Still only a "plus".
I was able to fix this board by actually reducing the resistor from 4.7k to 2.2k. Now it properly turns on/off the killer circuit properly.
Which resistor was that by chance?
It's the resistor that connects to the base of the color-killer transistor, located to the right of it. The transistor is pointed by the yellow arrow:
transistor.jpg
Image source: https://www.willegal.net/appleii/appleii-recreation.htm