recently,I found out one thing,use pc atx can use any macintsh and apple II motherboard.as long as provide enough volt line.you can use it.but it too big to put in the case.first time used at power supply,I can power up the macintosh easily.but when I used atx to mac II si.it was failed.so I have got result.just only atx can use old mac.does any one has this experence.you can share it and join this topic.
Anonymous
User login
Please support the defense of Ukraine.
Direct or via Unclutter App
Active forum topics
Recent content
Navigation
No Ads.
No Trackers.
No Social Media.
All Content Locally Hosted.
Built on Free Software.
We have complied with zero government requests for information.
Wow, I'm a little confused but I believe you are asking if anyone has converted an old Apple or Mac to ATX?
If so, the answer is yes. I've used ATX with Powermac G3's, both beige and blue + white, thats pretty easy.
I also hacked an ATX to run my PowerMac 6100 when its original supply died, and used the very same ATX powersupply to run my 7200 when I retired the 6100.
There's a good article on ATX power supplies for pinouts, adding switches, etc. here.
For using an ATX supply with soft-power Macs (outside of the nearly ATX compatible G3 and G4 desktops, you'll find some models use a +5V for power on, rather than the ground like the ATX uses.
This thread has links-a-plenty on the lampshade iMac ATX conversion, and should have what you need for converting those Macs that use the +5V power on.