Any way to do this?

6 posts / 0 new
Last post
Offline
Last seen: 15 years 3 months ago
Joined: Jan 13 2007 - 19:57
Posts: 208
Any way to do this?

Hey,

Is possible to transfer AVI files from a PC to a Mac using a Hot Drive? A Hot Drive is basically an Apple laptop hard drive in an external USB case. If the PC formats the drive, is there any way for my G5 running 10.4.11 to see it? I'm thinking no but I know that I don't know everything. Any ideas?

Thanks,

William
www.williamahearn.com

cwsmith's picture
Offline
Last seen: 1 year 2 weeks ago
Joined: Oct 13 2005 - 08:23
Posts: 698
Macs have been able to read a

Macs have been able to read and write to PC-formatted discs since what, System 7.1? There shouldn't be any problem transferring the files. Just remember of course that when you format the drive (on the Windoze side), you'll lose whatever data is currently on the drive.

True story: Back when my friend and I ran a recording studio, my friend Steve was sitting in front of his 386 PC running Windows 3.11, reformatting a stack of 3.5" floppies. I offered to help out on my Mac LCIII. "But I need them in DOS format," Steve said.

"No problem," I replied. "I can do DOS format on the Mac."

Within about 15 minutes, it was obvious that my LCIII was formatting DOS floppies *faster* than the 386 was formatting them. Steve now owns three Macs, and his lonely PC pretty much gathers dust.

Offline
Last seen: 15 years 3 months ago
Joined: Jan 13 2007 - 19:57
Posts: 208
Funny thing is . . .

Hey,

I knew I could do it with floppies in 7.x.x or later or anything in what's now referred to as "classic" (sort of like the cola). With the death of floppies and my lack of interest in OSX (it just doesn't have the same hands-on feel. To me, 6, 7, 8, and 9 were personal). OSX just seems distant. For some reason I supposed that with networking and cross-platform compatibility being so much better that Apple may have killed the ability. Once again, I was wrong and thank you for your answer.

William
www.williamahearn.com

dankephoto's picture
Offline
Last seen: 1 year 3 months ago
Joined: Dec 20 2003 - 10:38
Posts: 1899
initialize the drive as NTFS on the Wintel box

On the PC, initialize the drive using the NTFS file system, rather than FAT32. Then on the Mac, install NTFS-3G so you can read/write to the drive. Without that addition, you'd be able to read but not write to the drive on the Mac.

Biggest problem with FAT32 is that you can't have files larger than (IIRC) 2GB. Awhile back I thought that didn't matter, but it wasn't long before it did.

dan k

Offline
Last seen: 15 years 3 months ago
Joined: Jan 13 2007 - 19:57
Posts: 208
Thanks . . .

Hey,

I'll give it a go.

Thanks again,

William
www.williamahearn.com

Offline
Last seen: 15 years 3 months ago
Joined: Jan 13 2007 - 19:57
Posts: 208
Of course . . .

Hey,

Of course it worked. What a stupid question. Thanks again.

William
www.williamahearn.com

Log in or register to post comments