I have a wallstreet screen casing which a friend and I removed the rubber from, and I would like to know if it will fit a Pismo. I really like the looks of the bare metal.
Anyone know?
Anonymous
User login
Please support the defense of Ukraine.
Direct or via Unclutter App
Active forum topics
Recent content
Navigation
No Ads.
No Trackers.
No Social Media.
All Content Locally Hosted.
Built on Free Software.
We have complied with zero government requests for information.
No, there is no commonality between the two series. Of course too, one can pretty much make anything fit just about anything with enough ingenuity, hard work and dough.
One can I suppose glue down some sheet metal onto the Pismo's case. Or maybe some self-adhesive material. Or silver paint. On one project I used wide aluminum tape (kind used to seal ductwork) as a decorative element.
dan k
A good size piece of that aluminum tape is a structural element on my old Titanium G4. ;^) (Fixing a bad case of drop-induced "floppy corner" syndrome.) It's a shame that tape usually has printing on the shiny side, sort of ruining its usefulness as a decorative element for large areas.
--Peace
Odd, I've never seen that sort with printing. The type I have (bought at Home Depot) is 2" wide and just shiny aluminum. It burnishes out well, looks rather like real Al once you've got it pressed out nicely. Only problem is the 2" width, stitching together multiple strips shows seams. Still, it can be rather striking if artfully applied.
dan k
We use a form of it in our industry for securing chimney liner insulation. It comes as a roll with a wax paper backing, so that it comes off the roll nice and smooth. I'm fairly sure it comes in 3" rolls too, if not 4". Check for HVAC foil tapes.